Ayigun, Sunday and Akintunji, Lateef Lukuman and Muhammad, Uthman (2022) Fabrication and Testing of an Electric Oven. International Journal of Engineering and Advanced Technology Studies, 10 (4). pp. 1-6. ISSN 2053-5783(Print),2053-5791(online)
Fabrication and Testing of an Electric Oven.pdf - Published Version
Available under License Creative Commons Attribution Non-commercial No Derivatives.
Download (379kB)
Abstract
This research was carried out with the aim to fabricate and test an electric oven from locally available materials, with the objectives to fabricate electric oven for baking and cooking, electric oven that will be affordable compare to the ones obtainable in the market and to discourage deforestation in our communities. The materials used were metal plate 6.543mm, iron rod 12mm, welding electrodes, electric heat filament, mesh wires, connecting wires 4mm, temperature controlling device (analogue). The iron rods were used to construct electric oven frame in the form of a box with the provisions of inner walls where lagging materials was installed and finally electric welding was used to join the metal plates and the frame. The fabricated electric oven was tested and it was observed that it works with effectiveness and high performance from the result obtained.
Item Type: | Article |
---|---|
Subjects: | T Technology > TA Engineering (General). Civil engineering (General) |
Depositing User: | Professor Mark T. Owen |
Date Deposited: | 15 Nov 2022 12:49 |
Last Modified: | 15 Nov 2022 12:49 |
URI: | https://tudr.org/id/eprint/1199 |